A. The name of the subdivision;

B. Accurate angular and linear dimensions for all lines, angles and curves used to describe boundaries, streets, alleys, easements, areas to be reserved for public use and any other important features;

C. An identification system for all lots and blocks and names of streets. Lot lines shall show dimensions in feet and hundredths. Actual house numbers, as assigned by the City Engineer, shall be shown;

D. True angles and distances to the nearest established street lines or official monuments, which shall be accurately described on the final plat and shown by appropriate symbols;

E. Radii, internal angles, points and curvatures, tangent bearings and the length of all curves;

F. The accurate location of all monuments and fire hydrants to be installed shown by the appropriate symbol. All United States, state, city or other official benchmarks, monuments or triangulation stations in or adjacent to the property, shall be preserved in precise position;

G. Dedicate to the City all streets, highways, and other public lands included in the proposed subdivision;

H. Pipes or other such physical monuments as shall be placed at each lot corner;

I. Where it is proposed that streets be constructed on property controlled by a public agent or utility company, approval for the location, improvement and maintenance of such streets be obtained from the public agency or utility company and entered on the final plat in a form approved by the City Attorney. (Ord. 13-81 (part), 1981: prior code § 22-4-1(1))